|
|
|
|
|
| |
Posted by Don Davison on September 21, 2005, 12:33 am
Please log in for more thread options
I am interested in buying or modifying an electronic speed control with two
types of controls. The motor will be used on a gantry (for the tool motor)
and should be selectable by the operator, but yet be changed by an encoder
mounted to keep track of how fast the gantry is moving. The idea is to keep
the tool motor turning at a constant rpm-to-linear travel. For example I
should be able to set the speed of a sewing machine to get a specific number
of stitches per inch regardless if the gantry it is resting on is being
moved manually at 2 inches per second, or 8 inches per minute. This is
necessary to keep the stitch the same size regardless of speed. Does anyone
know of such a control for less than 200 dollars?
Sewing Robot
|
|
Posted by John Nagle on September 21, 2005, 2:01 am
Please log in for more thread options
Don Davison wrote:
> I am interested in buying or modifying an electronic speed control with two
> types of controls. The motor will be used on a gantry (for the tool motor)
> and should be selectable by the operator, but yet be changed by an encoder
> mounted to keep track of how fast the gantry is moving. The idea is to keep
> the tool motor turning at a constant rpm-to-linear travel. For example I
> should be able to set the speed of a sewing machine to get a specific number
> of stitches per inch regardless if the gantry it is resting on is being
> moved manually at 2 inches per second, or 8 inches per minute. This is
> necessary to keep the stitch the same size regardless of speed. Does anyone
> know of such a control for less than 200 dollars?
> Sewing Robot
No.
For around $1000, most of the Galil controllers can do it, though.
John Nagle
|
|
Posted by Peter Wallace on September 21, 2005, 12:10 pm
Please log in for more thread options On Tue, 20 Sep 2005 22:33:00 -0700, Don Davison wrote:
> I am interested in buying or modifying an electronic speed control with
> two types of controls. The motor will be used on a gantry (for the tool
> motor) and should be selectable by the operator, but yet be changed by
> an encoder mounted to keep track of how fast the gantry is moving. The
> idea is to keep the tool motor turning at a constant rpm-to-linear
> travel. For example I should be able to set the speed of a sewing
> machine to get a specific number of stitches per inch regardless if the
> gantry it is resting on is being moved manually at 2 inches per second,
> or 8 inches per minute. This is necessary to keep the stitch the same
> size regardless of speed. Does anyone know of such a control for less
> than 200 dollars? Sewing Robot
Really depends on required speed accuracy - if the sewwing machine
already has a electronic speed control and you can tolerate a 10-20 %
tolerance, you may need nothing more than a simple tachometer circuit for
the gantry that drives the sewing machine controller in an open loop
fashion...
Peter Wallace
|
|
Posted by Don Davison on September 21, 2005, 11:42 pm
Please log in for more thread options Thanks Peter: That is what I had in mind but was thinking of an encoder
(tach?) Actually, the machine does not have a speed control on it because I
haven't built it (I'm a real dreamer) I know there are machine that do this
but extremely expensive. I think I can build the simple electronic speed
control, but don't know how to retrofit it with a closed loop tach or
encoder. In theory if the control is linear the needle will stop when the
gantry stops, requiring the operator to pulse the circuit manually even if
the gantry is not moving. With that in mind I think it would require a
comparitor circuit ??? Do you have something in mind that would provide
accuracy within 10-20%?? For this application, that would be a very small
amount since the stitch may only be 1/16 inch. Ideally, this should be for
an AC motor, maybe 0.125 hp or 0.0625 hp. I have experience with milling
and welding and knowledge of aluminum foundry operation but need help with
the control circuit.
> On Tue, 20 Sep 2005 22:33:00 -0700, Don Davison wrote:
>
>> I am interested in buying or modifying an electronic speed control with
>> two types of controls. The motor will be used on a gantry (for the tool
>> motor) and should be selectable by the operator, but yet be changed by
>> an encoder mounted to keep track of how fast the gantry is moving. The
>> idea is to keep the tool motor turning at a constant rpm-to-linear
>> travel. For example I should be able to set the speed of a sewing
>> machine to get a specific number of stitches per inch regardless if the
>> gantry it is resting on is being moved manually at 2 inches per second,
>> or 8 inches per minute. This is necessary to keep the stitch the same
>> size regardless of speed. Does anyone know of such a control for less
>> than 200 dollars? Sewing Robot
>
> Really depends on required speed accuracy - if the sewwing machine
> already has a electronic speed control and you can tolerate a 10-20 %
> tolerance, you may need nothing more than a simple tachometer circuit for
> the gantry that drives the sewing machine controller in an open loop
> fashion...
>
> Peter Wallace
|
|
Posted by D Herring on September 22, 2005, 1:42 am
Please log in for more thread options Don Davison wrote:
> I am interested in buying or modifying an electronic speed control with two
> types of controls. The motor will be used on a gantry (for the tool motor)
> and should be selectable by the operator, but yet be changed by an encoder
> mounted to keep track of how fast the gantry is moving. The idea is to keep
> the tool motor turning at a constant rpm-to-linear travel. For example I
> should be able to set the speed of a sewing machine to get a specific number
> of stitches per inch regardless if the gantry it is resting on is being
> moved manually at 2 inches per second, or 8 inches per minute. This is
> necessary to keep the stitch the same size regardless of speed. Does anyone
> know of such a control for less than 200 dollars?
$200 is close to the price-point for low-end (e.g. Disney brand)
quilting machines with embroidary functionality built in. However,
these are completely computer-controlled x-y tables covering only 6" or
so. You want something the operator moves over wider distances.
As Peter suggested, you might be able to get by with an open-loop
control. Thus some part (tach mounted to a table axis? optical mouse?
roller bars near the point of sewing?) will detect how fast the
gantry/fabric is moving. Based on the measured velocity, determine a
voltage (or PWM %) that drives the sewing machine at the proper speed.
The required motor velocity is easy enough:
stitches/inch * inches/second = stitches/second
If you're lucky, a formula like voltage=a*speed+b will work, where B is
the cut-off voltage where the motor doesn't turn. Different slopes A
would then give you different stitches/second ratios.
If you're not lucky, you'll have to find some nonlinear formula. A
look-up table would probably be good here. Apply a known voltage to the
motor. Measure how many stitches/minute you get. Do this for several
voltages between no stitches and maximum speed and compile a table of
(stitches/minute,voltage) pairs. Then for a desired rate of stitching,
you can find the closest two entries in the table and use linear
interpolation to find the required motor speed. Most cheap
microcontrollers (PIC,AVR,...) could do this math fast enough.
The addition of a simple rotary encoder (servo pot or even just a
cam-drive microswitch) to the motor's output shaft (or the cam which
drives the needle) would allow you to do some feedback and get better
results than the open-loop control outlined above. This may be needed
as you sew through different thickness fabrics.
For me, the hardest part would be detecting the fabric motion. That,
and building the required circuits.
Q: Is this a solution in search of a problem? I thought the foot-pedal
worked quite well for adjusting machine speed while sewing. Yes, the
pedal takes training; but a simple stitches/inch system won't work at
unusual spots like the beginning/end of a seam, will it? Maybe a toggle
between stitches/inch and fixed rate would address this problem.
Later,
Daniel
|
| Similar Threads | Posted | | Motor speed control | August 12, 2005, 2:59 am |
| proportional speed dc motor control | April 11, 2006, 10:56 pm |
| Re: proportional speed dc motor control | April 12, 2006, 2:27 am |
| Leeson DC Variable Speed Motor Control = Ebay # 7538461721 | August 17, 2005, 1:55 am |
| Is there a way to program a robot with python (ex, an electric motor, control it's speed, etc) | July 8, 2007, 8:23 pm |
| control the servo vs control the speed controller | May 16, 2007, 2:20 am |
| Electronic control of air flow | October 13, 2005, 9:36 pm |
| speed control with modified servos? | May 4, 2007, 3:37 pm |
| Re: Motor Speed Problem | July 22, 2005, 3:12 am |
| Re: Motor Speed Problem | July 23, 2005, 12:03 pm |
|
|
|
XML site map
> types of controls. The motor will be used on a gantry (for the tool motor)
> and should be selectable by the operator, but yet be changed by an encoder
> mounted to keep track of how fast the gantry is moving. The idea is to keep
> the tool motor turning at a constant rpm-to-linear travel. For example I
> should be able to set the speed of a sewing machine to get a specific number
> of stitches per inch regardless if the gantry it is resting on is being
> moved manually at 2 inches per second, or 8 inches per minute. This is
> necessary to keep the stitch the same size regardless of speed. Does anyone
> know of such a control for less than 200 dollars?
> Sewing Robot