|
Posted by BottleBob on December 7, 2007, 8:06 pm
Please log in for more thread options
eljainc wrote:
>
> Hello,
>
> We are looking for sources where one can purchase NEMA size 17 stepper
> motors. The motors should be bipolar, however we are open to the
> possibility of using unipolar motors. We are looking to spend $25-50
> max per motor. We are also looking for motors that are high torque,
> in the order of 100 oz-in miminum holding torque, but closer to 150oz-
> in would be better.
>
> Can someone point me to a manufacturer, distributor or surplus outlet
> for these?
Mike:
If you don't get a response, try asking your question at:
http://www.cnczone.com/
--
BottleBob
http://home.earthlink.net/~bottlbob
| 
XML site map
> Hello,
>
> We are looking for sources where one can purchase NEMA size 17 stepper
> motors. The motors should be bipolar, however we are open to the
> possibility of using unipolar motors. We are looking to spend $25-50
> max per motor. We are also looking for motors that are high torque,
> in the order of 100 oz-in miminum holding torque, but closer to 150oz-
> in would be better.
>
> Can someone point me to a manufacturer, distributor or surplus outlet
> for these?