|
Posted by Rich Grise on March 6, 2006, 6:34 pm
Please log in for more thread options
On Sat, 25 Feb 2006 23:02:02 -0800, redbrickhat wrote:
> I am planning to build a robot that uses a Sharp GP2D120 for IR object
> detection.
> I would also like to control it using a VCR remote control and the Sony
> IR protocol.
>
> Is there any way of doing this without the IR signal from the remote
> control causing the GP2D120 to think it's detected an object?
>
> Any feedback will be appreciated.
>
> Thank you.
Just modulate them at different frequencies, like they do with radio
stations. :-)
Good Luck!
Rich
| 
XML site map
> detection.
> I would also like to control it using a VCR remote control and the Sony
> IR protocol.
>
> Is there any way of doing this without the IR signal from the remote
> control causing the GP2D120 to think it's detected an object?
>
> Any feedback will be appreciated.
>
> Thank you.