|
Posted by on December 15, 2005, 12:08 pm
Please log in for more thread options iceberg@verycool.co.uk wrote:
> Dale Stewart wrote:
> > LeOS has been superceded by the newer brickOS technology. There is a simple
> > package you can download that installs the minimum cygwin components to use
> > with with the Brickx Command Center IDE for using Java,C, NQC and other
> > languages. and the brickOS firmware as well as others. You will find this a
> > handy tool to use with the RCX, and things should be easier to configure.
> >
> > http://bricxcc.sourceforge.net/
> >
> > For minimal cygwin download look for link:
> >
> > "minimal brickOS and leJOS for BricxCC "
>
> Thanks - looks promising - but I have obviously got very fat thumbs as
> I am now stuck on BricxCCSetupCygwin.exe. It prompts "Select install
> disk" looking for file "BricxCCSetupCygwin.002" - which is nowhere to
> be seen!
On further investigation I found that the .exe was corrupt!
It seems there is something quirky about my downloading from
sourceforge. Both Firefox and IE truncated the file at 11.8MB the first
time I re-tried it (from two different machines).
| 
XML site map
> so please mention which route/version you have used.
>
> So far I tried:-
>
> 1. winlegOS: Installs but fails to build Demo (or anything else)
> without a useful explanation:-
>
> c:/tools/winlegos/util/makelx helloworld.ds1 helloworld.ds2
> helloworld.lx
> usage: /tools/winlegos/util/makelx.exe file.ds1 file.ds2 file.lx
> make.exe: *** [helloworld.lx] Error 1
>
> (The .ds1 and .ds2 files are present)
>
> 2. Full 110 MB cygwin install, cross-compiler build as described @
> sourceforge (brickOS 0.2.6.10 Instructions for installing on
> Win9x/NT/2000/XP). But Building GCC (buildgcc.sh) I get:-
>
> install: g++.exe does not exist
> chmod: cannot access `/usr/local/bin/g++.exe': No such file or
> directory
>
> the only g++.exe I see is in /bin - did I do something wrong?
>
> 3. I also tried loading a prebuilt H8 cross compiler and latest brickos
> (0.9.0) but:-
>
> /usr/local/crossgcc/h8300-hitachi-hms/bin/h8300-hms-gcc -O2 ... -c
> printf.c -o printf.o
> printf.c:25: stdarg.h: No such file or directory
>
> (cygwin configuration is such fun:)
>